--- Product Name Description
Adapter

For connecting different joint sizes. Any sizes or configuration not listed below can also be made. Modifications can be easily…

Adapter, Claisen Head

Head Heavy wall tubing and standard taper joints. All joints are the same. Modifications can be easily made to this…

Adapter, Gas Inlet

Made with a sturdy heavy wall joint and 10mm hose barb. Modifications can be easily made to this item upon…

Oil Bubbler

For use to observe gas flow in reactions while allowing the reaction to vent. There is a 2mm aperture in…

Oil Bubbler, Improved

Much the same as the standard oil bubbler but the bulbs blown in the outer tubes add extra insurance that…

Fritted Chromatography Column

Made of medium wall tubing, with a standard taper joint on top and a Teflon stopcock on the bottom. Columns…

Fritted Flash Chromatography Column

Made of medium wall tubing, with a 35/25 Socket joint on top and a Teflon stopcock on the bottom. Columns…

Fritted Chromatography Column, Socket Joint

Made of medium wall tubing, with a socket joint on top and a Teflon stopcock on the bottom. Columns come…

Column Flow Control Tops

To control the flow of gases in and out of a column. Heavy wall joints are used as well as…

Column Flow Control Top Socket

The very same as the standard only with a ball joint for improved durability. Corresponding stainless steel clamps also available….

Vigreux Column

Indentations add surface area for vapor contact. The length refers to the amount of straight tubing with the indentations. Other…

Reflux Condenser

A tightly wound internal coil allows for maximum efficiency. The hose barbs used are a 10mm O.D. Modifications can be…

Distillation Head, Cold Finger Style

This distillation head uses ground glass stopcocks and a high vacuum valve. The cold finger can be rotated for the…

Short Path Distillation Head

This product is available in various sizes to suit your needs. There are vigreaux indents and a support for added…

Distillation Head

Standard style distillation head with a sturdy support rod for added strength. The thermometer joint is a 10/30 with a…

Filtering Flask

Our filtering flasks are made from a heavy wall blank with 10mm hose barbs and 12mm on 2000ml and larger….

Round Bottom Flask

All round bottom flasks are made to have a heavy wall with heavy wall joints. Other joint sizes and volumes…

Rotary Evaporator Flask

A heavy wall flask with a heavy wall 35/20 socket joint, for use in a rotary evaporator system. Also available…

3 Neck Flask

All 3-Neck Flasks are heavy wall with sturdy center and side neck joints. Other joint sizes available, please inquire.

Fritted Buchner Funnel

This funnel is sturdily constructed with medium and heavy wall tubing for extra durability. A frit is used for filtration…

Fritted Buchner Funnel, Vacuum Take-Off

This funnel is sturdily constructed with medium and heavy wall tubing for extra durability. A frit is used for filtration…

Pressure Equalizing Funnel

Available in calibrated and non-calibrated versions. Both have Teflon Stopcocks. Our stopcock barrels and joints are thicker than most other…

Pressure Equalizing Funnel With Threaded Valve

Available in calibrated and non-calibrated versions. Similar to the standard pressure equalizing funnel but with a valve instead of a…

Separatory Funnel

Our Sep Funnels are blown in our shop, we make them far stronger than any other funnel on the market….

Separatory Funnel, Globe Style

This product has a very heavy wall for maximum durability and a Teflon drain valve. Modifications can be easily made…

Receiver, Distillation “Cow” Style

This distillation receiver comes in a variety of joint sizes and can accommodate flasks up to 500ml. The “cow” also…

Bumper Trap

For use with a rotary evaporator system. The trap has the standard upper opening in the inner tube as well…

Indestructible Schlenk Lines

Including manometer, trap and bubbler. Each schlenk line is custom made to our customer’s individual requirements. You choose the number…

Oil Diffusion Pump

375 Liters Per Second! The Worlds Fastest Glass Oil Diffusion Pump! Our diffusion pump offers speeds that rival metal diffusion…

SGD Schlenk Flasks

The SGD design is slightly different from the the standard Schlenk flask. The long tapered body makes for easier cleaning…

Schlenk Flasks

Made out of medium wall tubing for a longer lasting piece of labware. Our Schlenk Flasks come in a variety…

Round Bottom Schlenk Flasks

A standard Heavy-Wall round bottom flask adapted to be used with a Schlenk line. This item is available with either…

Schlenk Tubes

Made out of medium wall tubing for a longer lasting piece of labware. Our Schlenk tubes come in a variety…

Schlenk Filter Funnel

Like all of our Schlenk ware the Filter Funnel is constructed out of medium wall tubing for increased strength. The…